2004 suzuki eiger 400 manual. 2004 Suzuki Eiger™ 400 4X4 Manual Reviews, Prices, and Specs 2019-02-04

2004 suzuki eiger 400 manual Rating: 4,8/10 402 reviews

Suzuki Eiger 400 4X4 « Suzuki Motorcycles

2004 suzuki eiger 400 manual

Water other than distilled water can corrode and clog the aluminum radiator. I have always wondered what oil should be used in atv engines? Hi everyone new to the forum. Does anybody know what could be wrong? Back Door Power Window 4Runner 1. Step 4: Install the Galfer adapters onto the right and left calipers. In a sentence, I reversed the positive and negative on the battery like a dummy.

Next

2004 Suzuki Eiger Manual 400 4×4 « Suzuki Motorcycles

2004 suzuki eiger 400 manual

Step 2: To ensure no paint damage from a brake fluid spill, completely cover the front end of the bike. You might still be able to purchase the owners manual from you local dealer or an online atv parts house, cheapcycleparts. Also I notice that when I screw my dipstick in all the way and screw it right back out the oil level on the dipstick is right on full at the amount I show above. I only wish I could find another deal like this one!!! It's now 2017, 800 miles later, and a lot of abuse, I will honestly say it's bullet proof. I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before.

Next

Suzuki Eiger 400 4X4 « Suzuki Motorcycles

2004 suzuki eiger 400 manual

Press the back door power window switch until the door glass is fully closed and continue to hold the switch one 1 second or more after the door glass is fully closed. Only put in the book capacity. For a 400 actually 376, yes the engine Suzuk. Install the provided subframe bolt spacer into the subframe bolt hole. Open the back door glass. Any help would be greatly appreciated!! Neutral light comes on if I move shifter to neutral.

Next

Suzuki 2004 Eiger LT

2004 suzuki eiger 400 manual

The positioning sequence on the master cylinder is as follows: Master cylinder, washer, straight banjo from right line , washer, 12-degree banjo from left line , washer, and double banjo hex. Power Sliding Roof 4Runner, Sienna, Solara 1. I'm looking for a utility quad that I can ride for a month without having to touch it. Remove the sub-frame to main-frame mounting bolt. Leave the bracket slightly loose until step 6. Do not try to fill to the full line as you will put to much oil in the engine.

Next

Suzuki ATV Forum

2004 suzuki eiger 400 manual

Heading the list was, as one might expect, a revised engine. Modifications to throttle bodies will not be permitted. Homologated transmission gear sets one optional set of ratios per approved model will be permitted. The accessories can be purchased through local Suzuki dealers. A comprehensive General Information section offers the experienced technician at-a-glance service data without the need to review each specific section for specifications and tolerances. Remove the lower chain roller nut, leave the factory washer installed.

Next

Suzuki Eiger 400 4X4 « Suzuki Motorcycles

2004 suzuki eiger 400 manual

Fuel pump checks out ok, and I don't see any gas in the fuel pump vacuum line. Nylock nut threads to top of bolt on top of frame tube as shown in photo 2. In fact, nearly every upgrade to the smaller bikes appeared on the Gsxr 1000 a year before. But the real impetus for driving the Gsxr 1000 to the head of development and, indeed, shortening its development cycle was competition both on the track and in the showroom. Install the upper mounting bracket shown in Photo 4.

Next

Suzuki Eiger 400 LT

2004 suzuki eiger 400 manual

My last bike was a 2004 yz125 2 stroke and it was a pain. I know it is hard to say without seeing them and testing them out, but any experiences in general may help me to decide. When we discovered my mistake and corrected it, we turned on the bike, but the display did not light up and the key did not turn on the starter. See picture S4 Step 5: Install the right and left lines to the calipers, using the shorter line on the right side. Next, we will take off tranny side cover and look for any obvious damage.

Next

2004 eiger owners manual

2004 suzuki eiger 400 manual

Thread each banjo end into the adapter, and torque to 6 ½ Ft pounds. It ran rough been sitting out in the weather for a while. Maintenance: Clean and lubricate the kickstand pivot area after each ride. It has the 'bitch' seat with the compartments for storage. I'd love some more opinions from people who are more knowledgeable about the sport. Install Lower mounting bracket as shown in Photo 3 noting its orientation. Each Service Manual is model specific and contains easy to read text sections supported by top quality photography and illustrations.

Next