Cannot play back Cannot access the built-in memory - There is a problem with the built-in memory. Both highlights and shadows are thus reproduced more accurately, and skin tones are captured with fine gradation. Operating modes: 1 Open the gallery. A product and cart combination should be moved with care. You can use the movie timeline to break the scene to segments at fixed time intervals ranging from 6 seconds to 6 minutes. You have the option to activate the fader only one time or every time you start or stop recording. You can also initialize a memory card or the built-in memory only to permanently delete all the recordings it contains.
When you play back scenes from the date index screen they will be played back in chronological order. It continuously tracks your subject while automatically adjusting focus and exposure. Specifications and availability are subject to change without notice. Consult a Canon Service Center. Charging, Recording and Playback Times The charging times given in the following table are approximate and vary according to charging conditions and initial charge of the battery pack.
Basic Playback Playing Back Video Operating modes: 1 Press S. Picture and Sound The screen appears too dark. Consult your dealer or a Canon Service Center if the problem persists. You can also press u on the wireless controller. E Listen to the music track selected. If this message appears often without apparent reason, contact a Canon Service Center. E Listen to the music track selected.
If this message appears often without apparent reason, contact a Canon Service Center. Appendix: Menu Options Lists Menu items not available appear grayed out. Slideshow set to a music track 3 Touch the photo that will open the slideshow to display it in single photo view. Consult a Canon Service Center. The larger the subject appears on the screen, the louder the sound will be.
F Details about the story number of scenes, total playback time and editing options. Whether capturing a sunset, a day at the beach, or a fast-pacedsoccer game, Smart Auto delivers exceptionally accurate results. Advertisement Print version Many people prefer to read the documents not on the screen, but in the printed version. The Mains plug shall remain readily operable to disconnect the plug in case of an accident. Operating modes: 1 Open the list of scenes of the story that contains the scene you want to copy or move.
A Touch the tab of the desired memory: built-in memory only , memory card X or memory card Y. With the camcorder on, hold h pressed down for more than 2 seconds. In case of an issue with the Eye-Ficard, please consult with the card manufacturer. When I import to Final Cut X the footage is jittery and there's nothing I can do to change it. Recording 1 External recorder: Load a blank cassette or disc and set the recorder to record pause mode.
Operating modes: 1 Power the camcorder using the compact power adapter. E Open the index selection screen 0 59. In such case, recharge the built-in lithium battery 0 182 and set the time zone, date and time again. If the icon appears often, there might be a problem with the Eye-Fi card. Please read this manual carefully before you use the camcorder and retain it for future reference. B Recommended length of scenes in this category.
Deleted photos cannot be recovered. Viewing Photos Operating modes: 1 Press S. For details about the available menu options and settings, refer to the appendix Menu Options Lists 0 146. Consult a Canon Service Cen- ter. Up to 35 faces can automatically be detected, and 9 detection frames can be displayed at one time.
To recharge the built-in lithium battery: Connect the compact power adapter to the camcorder and leave it connected for 24 hours with the camcorder off. Consult a Canon Service Cen- ter. It can be used as directional microphone monaural or stereo microphone. For details about how to select an item, refer to Using the Menus 0 34. Check the memory card and make sure it is inserted cor- rectly. Make sure you save important recordings in advance using an external device 0 131. Forcing a mem- ory card into the slot if it is not correctly oriented may damage the mem- ory card or the camcorder.
In playback mode, the decorations will not be saved with the original recording. You will need to have installed the software supplied with your Eye-Fi card and com- pleted all the required configuration setup in advance. You can also attach the wrist strap to the strap mount on the grip belt to use both for extra convenience and protection. The camcorder will enter record pause mode and the selected story scene category will appear at the bottom of the screen. Be sure to insert the memory card as described in step 3. In addition to the 10x optical zoom, in.